 |
|
|
 |
|
|
 |
|
|
Bings Multi-Link Suspension Arms
|
Why are these suspension arms the best option for all Canadian
S13 / S14 / Z32 / R32 owners?
We use the best rod ends you will find on multi-link suspension arms for these cars. All of our rod ends are sourced directly from QA1 and we only use thier best.
We use only professional race-fabrication facilities to build the components for our arms and these companies are also Canadian. All other inputs are sourced in Canada or the USA.
We have clients come to us every week who used to run other brand name suspension arms or some of the unbranded cheap multi-link arms. When their suspension arms were damaged due to an accident, corrosion, mis-use or other situations that required attention they quickly found that there is no reasonable way to service any other suspension arms for the Canadian tuner.
We are the only company building these arms in Canada and we are also the only company in Canada that can quickly and economically service your multi-link suspension arms when you have a problem.
Our warranty is among the best around and when our customers are in an unfortunate accident on the street or go into the corner too hot on the track and need to replace damaged suspension components they find out that they do not need to buy entirely new arms; unless of course they dont own Bings multi-link.
If you spent more money on fancy brand name arms from Japan you will quickly find out that if you bend even just one arm or one rod end you will have to buy a whole new pair and pay top dollar, again.
Support us so that we can better support you. |
 | | |
S13 / S14 / Z32 / R32 Front Tension Control Arms **PRICE REDUCED**
|
 |
|
Our tension control arms use genuine QA1 rod-ends, double-adjusters and jam nuts as well as genuine Seals-It rod end seals. The sleeves and spacers are CNC machined out of 6061 aluminum right here in Canada then sent out for aero-space grade anodization, also right here in Canada.
These arms are as good or better than anything on the market today and ready to install on your S13, S14, R32 skyline, or Z32.
All of our multi-link products are backed by our unusually awesome warranty program and the post-purchase service you receive is second to none.
If you get into an accident and bust up any other aftermarket TC rod you will understand why it makes sense to switch to Bings.
TC arms are $210 shipped in Canada.
Price reduced from $235 |
| | |
Street Link Toe Arms - $175
|
 |
|
Adjustable rear toe arm for vehicles not equipped with HICAS, including the following: S13 / S14 / R32 / Z32.
Allows for proper alignment of toe angle and replaces your old worn our bushings on your old stock toe arms.
7/8", 6061 aluminum sleeves are anodized in gold with milled flats and swedged.
304 Stainless brackets are brushed to an attractive finish.
We only use the absolute best rod ends in the business, top of the line 3-piece QA1 rod ends with self sealing, teflon / kevlar linings that wont pound out like other rod end linings. These rod ends have a 17,000lbs load rating.
No one else in the industry offers this level of rod end as standard on their arms.
CNC machined aluminum rod end spacers for less weight and wont corrode
these will fit S14 but please specify when ordering
Off-road use only, professionally manufactured in Canada
Please see our Warranty Policy for further details. |
| | |
Street Link Traction Arms - $175
|
 |
|
Rear traction arms replace your old factory bushings for greater response from you rear suspension.
These will fit the following vehicles: S13 / S14 / R32 / Z32
7/8", 6061 aluminum sleeves are anodized in gold with milled flats and swedged.
304 Stainless brackets are brushed to an attractive finish.
We only use the absolute best rod ends in the business, top of the line 3-piece QA1 rod ends with self sealing, teflon / kevlar linings that wont pound out like other rod end linings. These rod ends have a 17,000lbs load rating.
No one else in the industry offers this level of rod end as standard on their arms.
CNC machined aluminum rod end spacers for less weight and wont corrode
Off-road use only, professionally manufactured in Canada
Please see our Warranty Policy for further details. |
| | |
Street Link Rear Upper Control Arm - $275 ** REVISED**
|
 |
|
This is our own design of rear upper control arm
The arc of the arm is such that it will fit every 240sx from 1989 to 1998. These arms are also excellent for your R32 skyline (RWD only) or Z32 300ZX. the sweeping bend allows for greater clearance for lowered vehicles.
The arms are made of thick walled chromoly and powder coated in black for rust protection.
Double adjuster hardware manufactured in Canada specifically for Bings multi-link arms and has a thicker wall than comparable industry offerings.
We only use the absolute best rod ends in the business, top of the line 3-piece rod ends with self sealing, teflon / kevlar linings that wont pound out like other rod end linings. These rod ends have a 17,000lbs load rating.
No JDM or ebay grade arms offer this level of rod end as standard on their arms.
CNC machined aluminum rod end spacers for less weight and wont corrode
Aluminum threaded adapters and rod ends are available by special order.
professionally manufactured in Canada
Off-road use only |
|
|
Additional images
|
| | |
|
|
|
|
Copyright © 2005-2008 Bings.ca
All Rights Reserved
|
|
|
|
|
